Archives for August 2018

6 Tips for Water Damage Repair

Repairing Water Damage

There is no doubt that water can cause a lot of damage to your home. There could be cracks in your foundation, which is caused by seeping and leaking water. Corrosion, rust, and mold can also spread when there are leaks in your home. Water damage repair. can be stressful too, and often you would not be sure of what to do during the repairs. Not to mention it can also be costly to fix any of the damages that have been caused by water inside of your home. But there is a solution to all of your issues with water damages.

Water Damage

Prevention

That one simple solution is prevention; you can stop water damage from happening in the first place by following these tips.

  • Fix Leaking Pipes

One of the primary sources of water damage in your home can be water leaking pipes. Turn of the water source at the meter to stop the flow of water. Then fix leaking pipes

  • Pump out water

Another way to clear the waters is to pump them out. A sump pump is a device that you can submerge underwater, and it pumps out all the water from your basement using a pipe or hose. It is particularly useful if you have got a flooded basement. Professionals often use these pumps to remove the water.

  • Open the window

If the weather isn’t too humid outside, moving air outside naturally can remove the moisture in the air of your home. Opening the windows and doors can start the circulation of air around the area. Open all drawers and cabinets to dry them out too.

  • Use a fan

High-powered fans can also help with the water damage repair Austin. These fans can be bought and even rented for as long as you need them. The sizes of these fans also vary according to the size of your area. When used they can effectively suck out any excess moisture in the air.

  • Dehumidifiers

A way to remove the moisture from the air is to use a dehumidifier. There are different kinds of dehumidifiers, but a simple portable dehumidifier can easily take all the water vapor from the air and clear out small and contained areas like your bathroom or bedroom. When you start to dehumidify, shut all the doors, and windows. This is to avoid any moisture or vapor from seeping into your area.

  • Use Desiccants

Desiccants like clay and silica gel can quickly absorb the moisture wherever they used. Sealing these materials in airtight containers and putting them in contained areas can help reduce the moisture there. However, This can take a long time, though, depending on how much moisture there is. Knowing these tips for correcting water damage can quickly help you overcome the high cost and difficulties in dealing with all the damage in your home. It is a good idea to learn all the ways to prevent water damage and also know what to do when dealing with its consequences.

 

Home Decorating Ideas

Simple Decorating Ideas

Everybody appreciates residence decorating tips when planning to make improvements to their property. You may have visions of your own about how your new residence décor would appear, but it is always good to have a substitute strategy. There is home decorating suggestions that you haven’t found. Consistent adjustments are getting created regarding trends in home decorating. Checking out new residence decorating suggestions may give birth to a new residence decorating program for your room.

How to Paint a Lamp Shade for Home Decor

When you alter your residing room decor, there are many costs. You can maintain charges down by refurbishing or refinishing items you previously have. One particular these a property decor craft project that can save you funds is repainting a lampshade on a favored mild fixture.

Spray Paint Lampshade

Components Essential

To paint a lampshade that will match your new residing room decor, you should, of course, have a lamp. The shade for the lamp really should have smooth sides but can be any content from plastic to cloth. You may also need acrylic craft paint and an assortment of paint brushes. A large piece of paper and pencil is useful for making a pattern to transfer onto the lampshade.

 Creating a Pattern

Making a paper pattern or a lampshade is straightforward. Remove the shade from the lamp and lay it on its aspect on a large piece of paper. Mark the beginning conclude with a pencil mark and draw a line on each the best and bottom of the shade. Roll the lampshade gradually together with the piece of paper, drawing lines at the two leading edges and base as you go. You will finish up with a curved form. Lower this out to kind the pattern for your lamp shade. Be sure to wrap it all around the real shade and trim off any extra. Design a pattern for the lampshade dependent on your personalized preferences of style. If you have a region style property, you may want to make checkers and chickens on the lamp shade. A sophisticated property may choose a lacy pattern or austere tonal stripes. Funky types like swirls, flowers and polka dots can be free-painted without having the assist of a pattern. Seem in residence decor publications for ideas, or go to the local residence retailer and determine what form of lamp shade pattern appears best to you.

 Completing the Challenge

Transfer the painting patter to the lampshade with carbon paper or some equivalent method. If the lamp shade is translucent, tape the paper pattern to the inside of the shade with the designs positioned as you want them. Set the lampshade back on the lamp and flip on the light and the pattern will shine using so you can paint it effortlessly. Be certain to cover the lamp with a cloth or paper to stay away from ruining it with paint drips as you work.

Roof Inspections for Your Peace-of-Mind!

Local Houston Roofer with Years of Experience and Service

Texas Metal Roofing Contractors, (TMRC) has been the experts in commercial roofing in Houston raising standards of customer satisfaction in the roofing industry over 25 years. Established to exceed the expectations of our clients, we strive to provide superior craftsmanship and exceptional service.

Houston Roofing Mission Declaration

We are specialists in the repair and restoration of all types of commercial roofing. Most likely we can restore your old commercial roof to better than new for half the cost of replacement. Longer lasting roofing repair and replacement is our organizational purpose in every endeavor we take on. Our roofing consultation services, recommendations, and bids are complimentary. Roof estimates and proposals are free.

One of Houston’s Most Versatile Roofing Companies

In Houston, asphalt roofing is a common choice for residential roof repair or new roof installation. However, many high homeowners now prefer to replace the old asphalt roofing with metal roofing. TMRC has years of experience with roof repair work, removal, and replacement of every kind of roofing material.

  • Commercial
  • Residential
  • Asphalt shingle
  • Clay or Concrete Tile
  • Wood
  • Metal
  • Slate
  • Torch down

Free Roofing Inspection

A complete roof estimate starts with precise measurements and a detailed free roofing inspection. Our Houston roofing specialist examines for damage and notes any unique conditions that factor into repair or replacement cost for the roof. Our free roof estimate is the product of our complimentary consultation. No sales pitch, just a straightforward explanation.

Fly By Nighters

Many roofing contractors around Houston will be eager to work with you, but they may not have the expertise that is required to do an excellent job on your roof. These are often traveling roofers who follow hailstorms to make an easy buck, but who do not really know the right materials to use to make your roof as solid and sturdy as it needs to be. Do not be taken in by these “fly by nighters;” instead, work with a roofing company that has a proven track record of successful work in your area. It will make all the difference when it comes to your final job.

 

Replacing Broken Glass in a Steel Casement Window

Requires Specialized Tools and Processes

Replacing a broken pane of glass on a steel casement window isn’t like repairing wood sash. It takes different tools, special materials, and a fine-tuned process. But once the former are assembled, the job is easy enough for anyone with a little DIY experience and a willing attitude.

Step 1: Assemble your materials, starting with the glass. Unless your glass is ordinary 1⁄8″ double-strength sheet glass, purchase 3⁄16″ or 1⁄4″ plate glass at a glass supplier to match the existing. (The new pane of glass should be about 1⁄8″ narrower than the opening’s height and width.) Steel sash should be glazed with putty specifically made for metal windows, such as DAP 1012. (Wood window putty won’t last.) You’ll also need an awl and hammer, metal sash clips, duct tape, a wire brush, needle-nose pliers, a small window suction cup, and whiting.

Step 2: Wearing eye protection and a respirator and using basic lead-safe work practices, begin removing the old putty. Because old putty can be hard and may contain lead, Portland cement, or asbestos powder, use an awl and hammer, not heat, to loosen it. Look for areas where the putty is loose or missing, insert the awl point between the putty and steel, and gently tap the awl with your hammer; the force needed will depend on the condition of the putty and its composition. If the putty is intact, start from the middle.

 Step 3: Once the putty is removed and the edges of the glass are exposed, look for two metal spring clips on each vertical side of the opening; pull them out with the needle-nose pliers. These clips are fragile and easy to lose; if you can hold onto them and they remain intact, you can reuse them. Otherwise, purchase new ones at a glass company. Next, with the ground and floor protected to catch glass shards, old putty, and dust, cover both sides of the glass with wide masking or duct tape to contain breakage. If the pane isn’t badly cracked, pull it out using a small window suction cup, or by tapping gently from the inside out. With the glass out, finish removing the old putty. If the sash rebate is rusty, use a wire brush or a drill and wire brush attachment to remove as much rust as possible. Brush or vacuum the dust away, and prime the cleaned area with a coat of oil-based rusty-metal primer.

Step 4: Since DAP 1012 is usually oily on top of the can and dense at the bottom, remove all of the material and knead it into a pliable ball, using whiting if necessary to firm it to an appropriate consistency. (If the putty is dry on the top of the can, return it for fresh material.) The new pane of glass can’t touch the metal frame in any direction, so back-bed a thin layer of putty in the frame to seat the glass, protect it from thermal movement, and create a weather seal. Install the back-bed with your fingers or a putty knife, pushing the putty into the frame (warm putty is more pliable). Next, insert the pane of glass, and gently push it into the putty until it is well-seated. Using needle-nose pliers, install the metal sash clips on each side to secure the pane.

Step 5: Before glazing, remove excess back-bedding material from the interior side with your putty knife. Next, glaze the exterior—I like to push the putty into the frame and glass tightly with the putty knife, but the common method of rolling putty into a snake and then inserting it also works. Take care to respect the interior sight lines of the sash—putty and paint on the outside shouldn’t be visible from the inside. Tool the putty, pushing it tightly to the frame and glass while cutting the edge away at the sight line. To finish, sprinkle a little whiting or plaster dust on a clean cotton rag, and carefully wipe away all the smears. After the putty dries, paint with two coats of oil-based paint.